Our digital laser heat transfer paper is easy to use and is applied in seconds. Digital laser papers were designed for both fuser oil and oil-less laser printers and copiers. They are for the heat transfer of photos and images to light colored T-shirts, sweatshirts, mouse pads, coasters, puzzles, handbags, binders, pad folios, paper, leather, magnets, wood veneer, nylon, and more.  Choose garments that have a tight weave.  This is particularly important when transferring to sweatshirts.   Mirror your image and load the paper so that the image will appear on the coated side of the paper.  If using a copier the paper should be fed into the copier or printer with the short dimension first (grain long).  Start with "Plain Paper" mode and if the toner does not fuse completely, adjust to a heavier paper setting.  After reproducing the desired image, cut away any blank or unwanted area before heat transferring. Place the heat transfer sheet face down on the substrate and press.  Your setting should be 375º F for 30-seconds, then peel while still hot. Sold in boxes of 100-sheets and in sizes of 8.5" X 11" and 11" X 17".

Washing Instructions:

Turn your garment inside out and wash in cold water using a mild detergent.  Do not use bleach.  Dry on low heat setting.  Do not iron directly on the heat transferred area.

Paper Storage:

Store your digital laser paper in a cool, dry area and do not remove from carton or poly bag until you are ready to use.